 |
 'Saviour' Escape Set with Aluminised Hood ( Model: Mariner) |
| |
|
'Saviour' mariner Escape set with polymer hood is the most preferred escape set with a break through technology in the hood. Most preferred by off shore platforms or any body working in hazardous atmosphere. |
| |
| Specification: |
A compact lightweight cylinder attached with a reducer enabling positive constant flow attached to a breathing hose. A breathing hose leads to a fabric padded aluminized heat reflective hood with exhalation valve and tightening seal. 'Saviour' mariner set is housed in a fire retardant pouch with shoulders straps for fast and easy downing. |
| |
| Advantages: |
* |
No user training required |
* |
Fast
and easy donning |
* |
Lightweight |
* |
No
storage space required |
|
| |
| Compliance
Cylinder: CCE Approved |
|
|
| Escape Hood with Polymer Hood (Model Mariner A l ) |
 |
consisting of Polymer hood is the most preferred escape set with a break through technology in the hood. Most preferred by off shore platforms, navy, shipping and marine, petrochemical or any body working in hazardous atmosphere. Having Breathing tube with Male QRC. Exhalation valve with diaphragm for easy flow. Hood specially designed to control in hood sound |
Hood duly connected with 6061 alloy, aluminum-magnesium-silicon blend.
Cycle-tested in excess of 100,000 cycles at service pressure. Minimum burst pressure tested to 2.5 times service pressure without failure. Manufactured to all recognized international standards.
Corrosion-resistant interior and exterior—unlike corrosion-prone steel cylinders. Performs well at low temperatures. Heat-indicating paint signals exposure to high temperature Service Pressure : 2015 psi / 139 bars. AIR Capacity : 8.8 cu.ft /248.4 ltrs. Min. Water Weight : 3.71 lbs / 1.68 kg. Empty Weight : 3.7 lbs / 1.7 kg The cylinder is fitted with pressure reduce of constant flow type with gauge having alarm indication on gauge panel and filling port. All this fitted in a polymer reinforced easy case with front mounted easy downing design and double safety straps .the carrying case has special nylon cylinder holding strap to avoid cylinder slip in aggressive conditions .supplied with Instruction Manual. |
Duration 15 min
Advantages
- No user training required
- Fast and easy donning
- Lightweight
- No storage space required
- Lighter cylinder
- Non-magnetic—ideal for use near magnetic-sensitive equipment such as MRI units.
- Lightweight—up to 40 percent lighter than most comparable steel cylinders.
- Consistent weight.
- Thick, damage-resistant walls.
- Brushed external surface provides attractive gloss finish.
- Corrosion-resistant interior and exterior—unlike corrosion-prone steel cylinders.
Compliance: Cylinder: CCE Approved |
| |
|
| 'Saviour'- Self Countained Breathing Apparatus ( Model: 'Saviour') |
| |
'Saviour' standard Self Contained Breathing Apparatus with Natural Rubber Face Piece and 'Saviour' easy flow Demand Valve provides efficient, reliable and economical operation in hazardous Atmosphere. A ideal option for any organization with hazardous atmosphere and statutory compliance |
 |
Specification
'Saviour' Self Contained Breathing Apparatus set with wide view panoramic Face piece, with rugged easy flow demand valve connected to Low pressure hose. Reducer with safety release valve connected to high pressure hose with gauge and warning whistle. Complete assembly mounted on anti corrosive FRP back plate. Cushion padded 2000 kg resistant nylon harness attached to the ergonomic black plate. Designed to connect various cylinders with international and national valves on 9 and 6 liters. The complete set is packed in smart carrying case with instruction manual. |
|
Advantages
- Economical option for safe working in hazardous atmosphere
- Best option for statuary compliance
- Back plate to accommodate 6 liters of 9 liters cylinders
Demand valve with air bypass for extra airflow |
Cylinders durations
Liters
Capacity |
Bars |
Duration
(Min) |
Approvals |
6 |
200 |
30 min. |
CCE |
Approval:
Cylinder: CCE Approved
Hoses: As per EN Standards |
|
|
|
| BA Set Carrying Case ( Model: BASCC) |
| |
|
'Saviour' BA Set carrying case made of FRP, can be wall mounted with universal clamps inside the box to accommodate any make of SCBA |
|
| |
|
| 'Saviour' Rapid Trolley (Model: RAPID) |
| |
 |
'Saviour' rapid Trolley mounted breathing system is designed for extended use for long duration breathing in hazardous atmosphere. A unique breathing system for 1.5 hours of breathing, which can be extended to unlimited duration because of its unique change over system. Supplying air to single or multiple workers with compressed air. ideally used in chemical / gaseous and chemical leakages. Compact design for emergency leakages and easy fast transportation. Can also be used with plant airline and save cylinder air |
| |
|
Specification
Trolley:
A ergonomically strong SS 304 / MS steel tubular structure. Mounted on lockable castor wheels. A friction free hose real with rewind handle and internal single piece inbuilt air connection for lowest pressure drop. Hose – real to accommodate 50 – 75 meters of hose.
Breathing equipment:
Option 1.
Silicon / Natural Face Piece mask connected to 'Saviour' positive pressure demand valve
Option 2.
EN approved Mask and Demand valve
Breathing hose: Anti – kink hose as per EN / MSHA Standards with both side crimped QRC |
| |
Manifold: Rapid manifold is incorporated with unique reducing assembly with pressure release valves, bleed valves and warning whistle. A breathing filtration unit is attached to the manifold to enable use of plant breathing air. An inbuilt by pass enables usage of plant air and save precious cylinder air. All Connection crimped and hydro tested
Advantages:
Rapid trolley can move in very small places.
Very portable for quick and fast response
SS – 304 material of constructing
Filtration by pass saves cylinder air
Compliance:
Cylinders: CCE Approved
Face Piece: CE approved |
|
|
|
