The Rescue Air Lifting Bag is a thin, strong, and molded envelope. It is made from a Neoprene covered Aramid reinforcement and has the power to lift, move or shift
weights up to 70 tons.
Of course there is more to a lifting bag system than the bag itself. The control equipment and components play a critical role in successful lifting bag use. Unlike other lifting bag systems,

Features of Rescue Airlifting bags

Dual Pushbutton Safety Relief and Control Valve
This controller will “go anywhere.” It is compact and extremely portable. There are no protruding joysticks, no cumbersome enclosure.
Rescue personnel can crawl into collapse areas without hindrance. Pushbuttons must be depressed for inflation or deflation. Large, easy to read, color coded gauges. Built in relief valves and closed couplings for maximum safety. Available in single or dual outlets.
Piston Regulator
Adjustable piston regulator is standard and can be preset to operating pressure. Durability is unmatched. “Pressure creep” is minimized as air supply is reduced. Maximum inlet pressure is 6000 psi and inlet fittings are available for all compressed
air cylinders.
Inline Relief Valves
Designed to relieve over-pressurization and allow a lift bag to remain inflated under a load. This is not simply a shut off valve. This valve will relieve excess pressure from an inflated bag caused by load shifts or temperature changes.
Air Hose
A full 3/8" (9.5mm) inside diameter in a wide range of colors. Couplings and nipples are field replaceable using simple hand tools. Working pressure of 300 psi assures reliability. Hose stays flexible over the full operating temperature range of the lift bag. Available in a wide variety of lengths. Closed couplings prevent air escape at disconnect (no blowing debris).
Approvals, Listing and Standards
Rescue Air Lifting Bags meet and exceed the intent of all known, recognized and published international standards* for the design, production and use of air lifting bags.
These standards and listings include:

1. National Coal Board (UK)
2. NATO Stock Listings
3. National Defense Supply Listing
4. ISO 9001-2000 Certified
5. Department of Industrial Relations (Australia)
6. South African Board of Mine Safety
7. Japan Standards Institute (JSI Compliance)
8. GSA Contract Item

Features:

1. Unique 360 degree rotating handle with eight positions allows rescuer to place the handle in the best position for the desired cutting action
2. Control valve placement provides compact design allowing greater access for the user
3. Tool design provides excellent balance and natural hand placement
4. Capable of all automotive cutting requirements
5. Anodized for corrosion protection