|
 'Saviour' PVC Chemical Splash / Rainwear (Model: PVC ST)
|
|
Specification
'Saviour' PVC chemical Splash made from soft and durable “TOYLAMNIA” grade PVC resistant, to peeling, cracking and tearing, also acid and alkali resistant with hood has a replaceable head gear and replaceable extra large visor air breather at back with flap, complete suit in high frequency welded with strong vinyl unbreakable, rust proof welded button holes defy rough wear |
Advantages
 Specially dotting at every weak point
Waist with elastic makes it universal
Available in boiler suit
Resistance to tears, abrasion and harsh environment
Most garments are highly-visibility yellow |
Usage Area
'Saviour' chemical splash rainwear suit protects workers in area where hazards such as acids, chemicals, caustics and oil exist. They are excellent for use on repair and maintenance jobs. |
|
| |
| 'Saviour' Chemguard Chemical Protective Garment |
 |
'Saviour' Chem-Guard suit is made of Tychem C Fabric
Design: Coat / Pant and hood with visor,
Specification of Fabric
Tychem C consists of a Durable tyvek substrate quality – coated with polyethylene. Rugged and durable, Tychem C is a tough barrier thatresists puncture and tears. Yet even in cold temperature, Tychem C remains flexible compared to competive fabric, based on measurement over wide range of temperature, Tychem C is the only polytheylene – coated fabric
Chemical penetration guide: Tychem C Perfoms against more than 80 chemicals, Tychem C Provides excellent resistance against blood, body fluid and viral contaminants and passed ASTM F 1670 for Blood penetration and F1671 for viral penetration |
| Physical Propertiesof Tychem |
Total Basis Weight
ASTM D3776-90 25OZ/yd2 |
Breaking Strength Grab (md/cd)
ASTM D3776-90 43/49 lbs |
| Thickness |
|
| ASTM D1777-75 10mils |
Tearing Strangth Trapozoid |
| |
(md/cd) |
| Mullen Burst |
|
| ASTM D-378687 65psi |
ASTM D1117-80 7/5lbs |
|
Advantages:
Light weight than PVC Suits
Long Lasting than PVC Suits
Economical
Can be land buried for disposal
Chemical resistant garment
Compliance: Fabric Tested As per EN Standards |
|
| |
| Ventilated Full Suits - FrontAir 2 One Piece Suit |
 |
The Respirex FrontAir 2 One Piece Suit is an air-fed suit designed for use in atmospheres where particulate contamination may be a hazard.
This suit is designed for use with breathable air supplied from an external compressed air source providing positive pressure. The quality
of air flowing into the garment must conform to the European standard EN12021:1999.
As supplied the suit will operate on a pressure range between 3.2 - 4.6 bar using 9.5 mm bore airline hose, minimum length of 10m, maximum length 60m.
All Respirex FrontAir 2 One Piece Suits are CE marked to EN1073-1:1998. |
Product Features
An air system completely contained within the garment thatprovides breathing air to the head and ventilation to the arms and legs with a minimum flow level of 265 litres per minute and a maximum flow level of 600 litres per minute
A waist belt thatsupports the air line and air system and holds the suit in the correct position
External airline hose retention point to reduce tripping hazard.
Double rear entry vertical zips
6 exhalation valves fitted with covers.
Permanently attached gloves
Anti slip feet |
Dupont Range of Dust / Chemical Resistant Garment 
TOP