|
 EN Approved Nomex Fire Proximity Trouser |
|
Pant Design Specifications
Suspenders: Clip-on, X style, elastic
Knee reinforcement: Padded knees, reinforced with outer shell
Waistband: High waist
Pockets: - Large 20 cm x 18.5 cm x 2.5cm (8 in x 7 in x 1 in) semi-bellow pocket with drainage eyelet, one on each leg
 Inside 17 cm x 14 cm (6.5 in x 5.5 in) hip pockets, one on each side of the front closure
|
Primary Closure System: #5 lightweight synthetic zipper, with one snap at the waistband
Reflective tape: - One 5 cm (2 in) silver band around each pant leg, approx 1 cm (0.4 in) below the knee reinforcement
One 5 cm (2 in) yellow band around each pant leg, approx 1 cm (0.4 in) below the yellow tape
Sizing Grid:
|
Waist size |
Inseam length |
S - Small |
81.25 cm (32 in) |
70 cm (27.5 in) |
M - Medium |
86.25 cm (34 in) |
72.5 cm (29.5 in) |
L - Large |
91cm (36 in) |
75 cm (30 in) |
1X - X Large |
96 cm (38 in) |
75 cm (30 in) |
NOMEX®, KEVLAR® and DELTA C™ are trademarks or registered trademarks of DuPont or its affiliates.
Viscose™ is a trademark of LENZING AKTIENGESELLSCHAFT CORPORATION |
|
|
| EN Approved Fire men Gloves (Model: Fireman) |
 |
Product use: Protection of firemen.
Application field : NIT 306 1 1997, This technical information note is only applicable to the firemen protection gloves which protect their hands during fire fighting, search, rescue and release operations.
The protection gloves intended to be used for special fires or specific chemical or radiological interventions are defined by other standards and ruled out the application domain of this N.I.T.
|
Technical description
CE CATEGORY : III Irreversible risks in accordance with :
STANDARDS :
EN 420-94 EEC Basic standards
EN 388-94 Mechanical hazards
EN 407-94 Thermal hazards
EN 659-94 Firemen hazards
N.I.T 306 1 97
CHARACTERISTICS :
Yellow water repellent cowhide grain leather glove. Gunn cut, winged thumb, gauntlet type.
Hand lined with Kevlar®/cotton jersey. Water repellent grain leather yoke at the base of thumb and middle finger. Veins protection. Split leather cuff. Velcro® strap.
Stitch with Kevlar® thread. Thickness leather only : 1.1/1.3 mm.
Norms :
EN 420-94 ; EN 388-94 ; EN 407-
94 ; EN 659-94 ; NIT 306 1 97 |
|
| |
| |
Dupont Range of Dust / Chemical Resistant Garment 
TOP